Ram & Register States Dump (Linkhub-E) - iButtonLink LINK 12 User Manual

RAM & Register States Dump (LinkHub-E)
Command " \! " (backslash + exclamation point)
Command Compatible With:
LinkHub-E
This command causes a formatted dump of the RAM contents and register states to be produced
TM
on the serial interface. A watchdog timer reset of the LINK device occurs after the dump is
complete.
TM
The LINK is rebooted at the completion of this command.
The LINK™ Family Manual
Version 1.6 ©iButtonLink, LLC 2016
Page 36