Low Level; Figure 14: The First Line Shows That That Bus Was Previously At Level 1. Next, Command " X " Is - iButtonLink LINK 12 User Manual

Low Level

Command " x " (lowercase X)
Command Compatible With:
LinkUSB
This command will take the 1-Wire® bus to a low level for LINK
used to cause a bus-wide reset by robbing power from all the bus devices for a few seconds.
Issue a reset (" r ") command or any bit or byte command to return the 1-Wire® bus to
functionality.
Figure 14: The first line shows that that bus was previously at level 1. Next,
command " x " is used, which shows that the bus is now at a low level.
S C
IMILAR OMMANDS
• " l " – Level Test
1
0
:
The LINK™ Family Manual
Version 1.6 ©iButtonLink, LLC 2016
Link | LinkHub-S | LinkHub-E | LinkOEM |
TM
devices. This function is
Page 33