Technical Data - Siemens RAV12 series User Manual

Self-learning room temperature controller
Table of Contents

Advertisement

Notes
Engineering
Fitting and installation
Commissioning

Technical Data

Siemens Building Technologies
Landis & Staefa Division
• The room temperature controller should be fitted in the main living room.
• The place of installation should be chosen so that the sensor can capture the room
temperature as accurately as possible, without being affected by direct solar radia-
tion or other heating or cooling sources.
• Mounting height is approx. 1.5 m above the floor.
• The unit can be fitted to most commercially available recessed conduit boxes or di-
rectly on the wall.
• When installing the room temperature controller, the base plate must first be fitted
and wired. Then, the unit is engaged at the top, swung downward and secured with a
screw.
• For more detailed information, please refer to the installation instructions supplied
with the controller.
• For the electrical installation, the local safety regulations and standards must be
complied with.
• The control characteristics can be changed with the help of the DIP switches located
at the rear of the unit.
• If the reference room is equipped with thermostatic radiator valves, they must be set
to their fully open position.
• If the measured room temperature does not agree with the set room temperature on
the setting knob, the detector should be recalibrated (please refer to "Calibration of
detector").
Operating voltage
- conformity to
EEC directive
low voltage directive
Switching capacity of relays
Voltage
Current
Measuring element NTC 68 kΩ at 25 °C
Measuring range
Time constant
Set point setting range
Normal temperature
Economy temperature
Resolution of analogue time switches
24-hour time switch
Weekly time switch
Set point for frost protection
AC 230 V
Insulation class
to EN 60730-1
89/336/EEC
Degree of protection
73/23/EEC
to EN 60529
Electromagnetic compatibility
AC 24...250 V
Immunity
8 (3.5) A
Emissions
Perm. ambient temperature
0...40 °C
Operation
2 min max.
Storage
Perm. ambient humidity
3...29 °C
to DIN 40040
3...29 °C
Weight
Colour
15 min
60 min
5 °C
II
IP 30
EN 50082-2
EN 50081-1
3...35 °C
-25...+60 °C
G
0.2 kg
White
RAL 9003
CE1N2226E / 01.02.2000
5/8

Advertisement

Table of Contents
loading

Table of Contents