Switching Times - Siemens REV23RF16A User Manual

Switching program
Example with 2 heating
periods per day
Holiday function
Remote operation
Factory settings
Block /
Oper-
week-
ating
days
mode
1st period
1-5
06:00
Mo-Fr
Auto
6-7
07:00
Sa-Su
1-7
00:00 24:00
Mo-Su
1-7
00:00 24:00
Mo-Su
1-7
00:00 24:00
Mo-Su
Absence
6/16
Siemens Building Technologies
HVAC Products
The switching program can be used as a 7-day or 24-hour program, depending on
programming. It is also possible to select one of the continuous operating modes
with which the switching program is not used.
With the 7-day program, all individual days, working days (1-5), weekend (6-7), or the
entire week (1-7) can be programmed.
For each heating / cooling period, 3 different switching patterns are available.
There is a choice of 1, 2 or 3 heating / cooling periods. For each heating / cooling pe-
riod, the start time, end time and comfort setpoint are to be entered.
In between heating / cooling periods, it is always the same economy temperature set-
point that is used. This economy temperature setpoint can be adjusted on the tempera-
ture menu.
°C
22
20
Heizphase 1
18
16
08
The holiday function is to be selected on the user menu. Set the start of the holiday
period (day of departure /
the temperature setpoint (
temperature for a period of up to 99 days. Every day at midnight, the counter subtracts
one day.
When the holiday period is over, the counter reads 00, and the controller will automati-
cally resume the operating mode selected last.
To be flexible, the REV23RF has no connection facility for remote operation.

Switching times

2nd period 3rd period
08:00 11:00 13:00 17:00 22:00 19
23:00
Room Temperature Controller REV23RF16A/SET
Heizphase 2
10 18
/ weekday), the duration of the holiday period and
). This will enable the controller to maintain the adjusted
Temperatures in ° C
1st 2nd 3rd
period period period
23 20 23 21 23 16
19 23
19 23
22 h
29
16 29
16 29
5 35
12 30
CE1N2269en
09.10.2003