Siemens REV23RF16A User Manual page 2

Functions
Type summary
Ordering
Technical design
Display and
operating elements
2/16
Siemens Building Technologies
HVAC Products
For control of the following pieces of equipment:
• Solenoid valves of instantaneous water heaters
• Solenoid valves of atmospheric gas burners
• Forced draft gas or oil burners
• Smaller circulating pumps of heating systems, zone valves
• Electrical heating elements
• Thermal actuators
• Cooling and refrigeration equipment
• Radio signal transmission
• PID control with self-learning or selectable switching cycle
• 2-position control
• Automatic mode with 7-day switching program for 24-hour, working day, weekend or
7-day operation with up to 3 heating or cooling periods per day
• Each heating or cooling period has its own temperature setpoint
• One 24-hour operating mode with one heating or cooling period
• Override button
• Sensor calibration and reset function
• Frost protection or overtemperature protection
• Limitation of the minimum setpoint
• Holiday mode
• Heating or cooling mode
• Periodic pump run
• Optimum start control with the first heating period
Radio signal equipment consisting of:
Room temperature controller (transmitter), receiver
(switching unit) and support
Room temperature controller (transmitter) and support
Receiver (switching unit)
When ordering, please give the type references according to «Type summary».
The controller / transmitter REV23RF is supplied complete with batteries.
Room Temperature Controller REV23RF16A/SET
REV23RF16A/SET
REV23RF
REV-R.02/16A
CE1N2269en
09.10.2003