Siemens REV23 Operating Instructions

en
Operating Instructions
REV23
Commissioning and quick start
1. Remove controller from its base and open cover
of the battery compartment.
2. Remove the black battery transit tab. The
controller will switch itself on.
3. Close the battery compartment and replace
the controller.
Selecting the operating mode
The operating mode selector enables you
to select 5 different operating modes:
• Automatic operation with a maximum of 3
heating / cooling periods
•
Continuously comfort mode
•
Continuously economy mode
•
Continuously frost protection mode
•
24-hour mode with current comfort setpoint
Changing temporarily the current
setpoint temperature
The change is
maintained until
° C
the next
switching point is
reached!
1. When pressing the or button for the
first time, the currently valid setpoint temperature
will be displayed. It can be readjusted in
increments of 0.2 °C (max. +/-4 °C).
2. After 3 seconds, the initial display will
automatically appear again.
Changing temporarily the
temperature setpoint (savings tip)
In operating modes and
button can be pressed to make a manual
change from comfort to economy mode,
or vice versa. The change will
automatically be cancelled when
reaching the next switching point or
when selecting another operating mode.
All manuals and user guides at all-guides.com
Symbols
"Time" menu
"Temperature"
T
menu
"Heating
periods" menu
"Absence"
menu
Battery
change
Remote
operation
Functions of the roller selector
Press:
•
You access the menu
level
• You activate the menu
• You save the inputs
• You switch to the next
CLICK
menu item
• You accept the menu
item
Escape button
Press the Esc button to return to the menu level previously activated or to leave
the menu level in a number of steps until you reach the initial display
(the settings currently displayed will be accepted).
Setting the time of day and the weekday
ð
CLICK
ð
h
ð
If no button is pressed for 10 seconds, the setting
displayed will be accepted and the initial display will
appear again.
Changing temperatures long-term
ð
CLICK
° C
ð
° C
ð ð
° C ð
ð ð
, this
If no button is pressed for 10 seconds, the setting
displayed will be accepted and the initial display will
appear again.
Siemens SBT / HVAC Products
Absence 24-hour mode
Comfort
Heating active
setpoint
Economy
Cooling active
setpoint
Automatic Setpoint frost
operation protection
Continuously
Setpoint remote
comfort mode operation
Continuously Absence
economy mode setpoint
Frost 1 heating
protection period
+
1. Press: You access the menu level;
the clock flashes.
2. Press: You accept the menu;
the hours flash.
3. Roll: Set the current hour.
4. Press: You save the input;
the minutes flash.
ð
h
5. Roll: Set the current minute.
6. Press: You save the input;
the weekday flashes.
7. Roll: Select the current weekday.
ð
8. Press the Esc button to return to the menu level:
the T menu flashes
(change not necessarily required; press
the Esc button again to return to the
initial display).
1. Press: You access the menu level;
the clock flashes.
ð
2. Roll: Toward the display to the T menu.
3. Press: You accept the menu;
symbol
4. Press: You accept
ð
the setpoint flashes.
5. Roll: Set the comfort temperature
6. Press: You save the input;
symbol
ð
7. Press: You accept
8. Roll: Set the economy temperature .
9. Press: You save the input;
° C
ð symbol
10. Press: You accept
11. Roll: Set the frost protection temperature .
12. Press: You save the input; symbol
flashes.
13. Press: You accept
14. Roll: Set the temperature setpoint
while remote operation is active.
15. Press the Esc button to return to the menu level:
The heating periods
(Change not necessarily required; press
the Esc button again to return to the
initial display.)
CE1B2264en
2 heating
periods
3 heating
periods
Current weekday
Workingday group
Weekend group
Entire week
Time schedule
Roll:
• You go from one menu to the
next
•
You change the setting
variables (temperature in
increments of 0.2 °C, time in
increments of hours and
minutes)
•
You select predefined functions
flashes.
;
flashes.
; the setpoint flashes.
flashes.
; the setpoint flashes.
; the setpoint flashes.
menu flashes
12.03.2002