Safety; Electromagnetic Radiation; Moving Parts - Quickie WheelDrive User Manual

Power assist
Table of Contents

Advertisement

WheelDrive
2

Safety

Please note all safety instructions before
starting to use the power assist.
Warning!
Always follow the instructions given next to
the warning symbols! Not following these
instructions may result in physical injury,
damage to the wheelchair or damage to
the environment. Where possible, the
warnings have been placed in the applicable
paragraphs.
2.1 Temperature
Warning!
Avoid physical contact with the motors in
the power assist system. The motors are
continuously in motion during use and can
become warm. After use, the motors will cool
down slowly. Physical contact may cause
burns.
Caution!
Ensure that the power assist is not exposed
to direct sunlight for extended periods of
time, because this can increase surface
temperatures signifi cantly.

2.2 Electromagnetic radiation

The power assist has been tested for
compliance with the relevant requirements
regarding electromagnetic radiation (EMC
requirements). This implies the power assist
can be used under normal circumstances.
Note!
It cannot be excluded that electromagnetic
radiation emanating from mobile telephones,
medical apparatus and other sources, may
have an infl uence on the power assist.
It cannot be excluded that the power assist
will interfere with the electromagnetic fi elds
of, for example, shop doors, burglar alarm
systems and/or garage door openers.
Caution!
Do not use the power assist near strong
electrical interference fi elds, such as
products with very strong magnets.
In case you experience strange behaviour
in a particular environment, switch off your
power assist or leave that environment as
soon as possible. If the strange behaviour
remains, please contact your dealer.

2.3 Moving parts

Warning!
The power assist has moving and rotating
parts. Be careful: contact with moving parts
may result in serious physical injury or
damage to the power assist.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents