Use Of The Power Assist - Quickie WheelDrive User Manual

WheelDrive
4

Use of the power assist

4.1 Activating the power assist
In order to use the power assist, both wheels
(left and right) should be turned on (fi gure 3)
A. Power On/Off button
B. Profi le buttons I, II and III
C. Battery indicator
A. Power On/Off button
Switch the power assist on by pushing the Power On/Off button on the user interface. Switch it off
again by pushing the Power On/Off button a second time
B. Profi le buttons I, II and III
The power assist has 3 driving profi les: I, II, III, Each profi le and support level -with specifi c driving
characteristics- can be selected by pushing the appropriate button on the user interface. An
appropriate driving profi le and speed should be chosen depending on the user's needs and safety.
Driving Signal
profi le
I One beep
II Two beeps
III Three beeps
Note!
Selection of the same driving profi le on both
power assist wheels normally gives the best
driving experience.
When turning on the power assist the driving
profi le will start at profi le I.
C. Battery indicator (see next paragraph)
Recommended use area
Indoors, many obstacles
Indoors, limited number of obstacles
Outdoor areas and inclines
C
A
Energy consumption
Low
Medium
High
13
3
B