Advertisement
2
(2)-1 Safety mark
(2)-2 Safety device
1) Gear safety cover
2) A gear safety cover is attached for user safety against the rotation of pulley and
bearings between the drum and control box
-Make sure the gear cover is sealed before you use the product
-Fully cool the machine down before you open the cover to perform maintenance
1) Hazardous voltage
This label is to warn of hazardous voltage.
Turn off the power to avoid any electric
shock or burns before using
2) Moving parts
This label is to warn of its moving part. Use
the safety cover to avoid any injury. Always
turn off the power before doing any
Maintenance
3) Burns
This label is to warn of possible burns. Do
not touch its surface as it's hot
4) Fire hazard
This label is to warn of Fire hazard.
Especially, watch out for short circuit or gas
leakage, and flammable objects near the
product
5
Advertisement
