Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OUMAN EH-800
Summary of Contents for OUMAN EH-800
- Page 1 English EH-800 INSTALLATION INSTRUCTIONS v. 3.0.0 Package includes components for: - ESBE 3MG valve - ESBE boiler valve, brass - ESBE boiler valve, cast iron - TERMOMIX valve - VEXVE AMV valve - BELIMO ball valve Must be ordered separately:...
-
Page 2: Table Of Contents
5 VEXVE AMV valve p. 6 BELIMO ball valve p. 7 ESBE VRG/VRB valve p. 8 EH-800 connections p. 9 Controller settings p. 10 - Changing the language - Time and date setting - Taking additional connections into use using the cord and... -
Page 3: Esbe 3Mg Valve
ESBE 3MG VALVE Valve opens clockwise Valve opens counterclockwise Shaft bevel position during Shaft bevel position during installation (valve shut) installation (valve open) Supply Supply water water А Return water Return water Set the installation plate into the valve as indicated in the figure. The pegs located in the corners of the installation plate should be aligned with the corner holes. -
Page 4: Esbe Boiler Valve, Brass/Termomix
ESBE BOILER VALVE, BRASS/TERMOMIX Valve opens clockwise Valve opens counterclockwise Shaft bevel position during Shaft bevel position during installation (valve shut) installation (valve open) Return water Supply Return Supply water water water А Set the installation plate into the valve as indicated in the figure. The pegs located in the corners of the installation plate should be aligned with the corner holes. -
Page 5: Esbe Boiler Valve, Cast Iron/Termomix
ESBE BOILER VALVE, CAST IRON/TERMOMIX Valve opens clockwise Closed Open Valve opens counterclockwise Open Closed Use the manual control knob to turn the valve all the way to the left, so the valve is either completely open or clo- sed. The regulator direction of the valve opening counter-clockwise should be changed according to Section 12 (regulator installed). -
Page 6: Vexve Amv Valve
VEXVE AMV VALVE Initial preparations Attach the locking pieces to the installation plate according to the illustration. Valve opens clockwise Valve opens counterclockwise Shaft bevel position during Shaft bevel position during installation installation (valve shut) (valve open) Supply Supply water water Return water Return water... -
Page 7: Belimo Ball Valve
BELIMO BALL VALVE Flow direction Open Closed Set the installation plate into the valve as indicated in the figure. The pegs located in the corners of the installation plate should be aligned with the corner holes. Valve shaft should be open during installation. The regulator direction of the valve opening counter-clockwise (1b) should be changed according to Section 12 (regulator installed). -
Page 8: Esbe Vrg/Vrb Valve
ESBE VRG/VRB VALVE Note! Must be ordered separately Valve opens clockwise Valve opens counterclockwise Shaft bevel position during Shaft bevel position during installation installation (valve shut) (valve open) Supply Supply water water А Return water Return water Remove the manual operation lever and the scale plate. Set the installation plate into the valve as indicated in the figure. NOTE! Turn the valve shaft bevel according to the operating direction. -
Page 9: Eh-800 Connections
EH-800 CONNECTIONS H1 Supply water sensor Is already attached to the controller. H2 Supply water sensor Connect/ is already attached the external unit to the controller using the RJ45-2. Fasten the surface sensor to the surface of the pipe entering the network about 0.5...1.5 m from the valve either on the top or side of the pipe. -
Page 10: Controller Settings
The default is that the controller gives an alarm when the switch opens. (see user manual p.23). Heating mode selection Heating mode Using EH-800 as a heating controller Measur. channels settings > Floor heating, damp rooms Heating mode Radiator heating, normal >... -
Page 11: Setting The Valve Direction For The Controller
A mechanical thermo- 2 1 3 stat should be installed on a supply water pipe which stops the circulation pump in case of overheating. Ouman Oy has in it`s product range a surface mounted thermostat C01A. Pump control... -
Page 12: Faults Unrelated To The Regulator
Warranty: Ouman Oy has given EH-800 a three year warranty for the device. The warranty covers repair of the device at Ouman Oy:s factory and includes necessary spare parts. The warranty is not in effect if the device has been installed incorrectly or mechan- ically damaged.
Need help?
Do you have a question about the EH-800 and is the answer not in the manual?
Questions and answers