Table of Contents
Advertisement
Compact freely programmable automation device
- Ouflex M is a DIN-rail-attachable, monitoring-, controlling- and regulating device.
- Ouflex M can be as a master device and slave device in the Modbus bus.
- The DIN-standard-compatible structure of the Ouflex M device enables installation to most common cabinets.
- Detachable strip connectors make installation easier.
Saving energy, creating comfort
OUFLEX
OUFLEX
USER MANUAL
Application and user interface are freely
programmable with OuflexTool. You can
load the application to the controller by
using SD-card.
M
M
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OUMAN Ouflex M
Summary of Contents for OUMAN Ouflex M
- Page 1 - Ouflex M is a DIN-rail-attachable, monitoring-, controlling- and regulating device. - Ouflex M can be as a master device and slave device in the Modbus bus. - The DIN-standard-compatible structure of the Ouflex M device enables installation to most common cabinets.
- Page 2 When visible, this information is shown indented. Maintenance code There may be a maintenance code in use in your Ouflex M device. In this case, you can see the information even when it’ s locked, but you can’t make changes to settings without entering the maintenance code. Nor- mally, you lock the most critical settings behind the maintenance code, or settings the changing of which requires expertise.
-
Page 3: Table Of Contents
3.2 Bus points ............................13 3.3 Time programs ............................13 4 Settings ..........................15 5 Measuring point control/manual control ..............16 6 Naming ..........................16 7 Remote use ........................17 Optional accessories ......................18 Ouflex M structure ......................19 Technical information ......................20... -
Page 4: System Settings
Enter hours 19:44 The Ouflex M clock takes daylight savings and leap years into account automatically. The clock has a backup for power outages lasting at hh:mm least three days. -
Page 5: Text Message (Sms) Settings
Cancel: Press and hold ESC Device ID: It’ s possible to define device ID to Ouflex M. Device ID works as a pass- word for SMS communication. When device ID (e.g. TC01) is in use, it should be added in front of the keyword in every SMS (e.g. TC01 IN-... -
Page 6: Network Settings
15 16 17 18 19 20 of the controller. The maximum length of the RJ45 ethernet cable System settings between Ouflex M and Oulink is 10m and all 4 pairs must be con- Document code and revision Document type Date 09.06.2015... - Page 7 Address 1> Baudrate 9600 > will be shown in the first row which one of bus Ouflex M device acts as Data bits 8 > a slave device. Set Ouflex M bus address. Note. Two devices may not Stop bits 1 >...
- Page 8 2. The VPN ports used by ACCESS are not blocked ACCESS-service is using VPN to the internet connection. Network has to allow UDP communication from any port towards port 1194 in internet and the responces from that port back to Ouflex M device. System settings > Network settings-> OULINK...
-
Page 9: Display Settings
You can read Ouflex M device information and change settings. In use You can read Ouflex M device information but you can not change settings without entering the lock code. The factory setting of lock code is 0000. If you take lock code into use, change the code for security reasons. -
Page 10: Restore Settings And Updates
15 16 17 18 19 20 Ouflex M asks if you want to save existing device configuration to be taken in use after the update. Ouflex M requests reboot to start the update of the new software. Document code and revision Date 09.06.2015... -
Page 11: Alarms
Reset alarm history See following page. Alarm receivers A GSM modem can be connected to the Ouflex M for alarm sending a text Alarm receivers message to the alarm team. The alarms are sent to correct team according to Team 1 >... - Page 12 4. To exit edit mode, press ESC. If the alarms are routed, alarms are forwarded as text message to alarm team according to the routing schedule. You can acknowled- ge an alarm by forwarding the same message to the Ouflex M.
-
Page 13: Point Info
”Manual control” and finally en- ter a fixed value. If any of the input or output is a manual opera- tion, the palm image appears on the begining of the line. Ouflex M device has temperature sensor, which measures the circuit board 3.2 Bus points... - Page 14 Weekly schedule Point info -> Time programs -> Weekly schedule Graphic view Weekly schedules include graphic views (in general view mode and Weekly schedule MO > edit mode) with data on the exact time that new control commands TU > are received.
-
Page 15: Settings
You can lock the settings in Ouflex device system settings. If a GSM modem is connected to Ouflex M device and the setting values have been brought into SMS interface, you can edit settings by text message. Send a message “ Key words”. The reply message shows you which key words are in use in the application. -
Page 16: Measuring Point Control/Manual Control
25 % > If a GSM modem is connected to Ouflex M device and the setting values have been brought into SMS interface, you can edit settings by text message. Send a message “ Key words”. The reply message shows you which key words are in use in the application. -
Page 17: Remote Use
7 Remote use Communication via a mobile phone If a GSM modem is connected to the Ouflex M you can communicate with the controller by text messages using command words. Send the following text message to the controller: KEY WORDS. -
Page 18: Optional Accessories
Insert SIM card into the slot and make sure it settles properly. Push the slot back to its place. Set the SIM card PIN code as Ouflex M devi- ce PIN code. Make sure PIN inquiry is in use in the SIM card. -
Page 19: Ouflex M Structure
Ouflex M structure Micro-SD memory card slot Print3) USB-connector RS-232 connection (Oulink, SMS-modem) 3 4 5 6 7 8 24V ~/+ B2 A2 B1 A1 RS-232 connection (External display) C NO C NO C NO C NO C NO C NO... -
Page 20: Technical Information
OULINK ETH adapter provides Modbus TCP / IP interface for V15 device. GSMMOD 5 By connecting the GSM modem to the Ouflex M, you can communicate with text messages to device and receive alarms to GSM phone. Additional Control panel The Ouflex C LCD external display is connected to the flap cover over the RJ12 jack.
Need help?
Do you have a question about the Ouflex M and is the answer not in the manual?
Questions and answers