Yale Real Living YRD210-ZB Installation And Programming Instructions page 14

Feature Programming Through Menu Mode Using Master PIN code*
1. Touch the screen with the back of your hand or fingers to acitivate
2. Enter the 4-8 digit Master PIN code* followed by the
Lock Response: "Menu mode, enter number, press the
3. Enter digit corresponding to the function to be performed followed by the
Follow the voice commands.
Note: If the lock is connected to a network controller, it is recommended that
it is programmed through the centralized user interface (PC or hand-held device)
to ensure communication between the lock and the controller unit.
*The default Master PIN code must be changed prior to programming of the lock.
1
M
An ASSA ABLOY Group brand
2 3
Master PIN Code Setting
User PIN Code Registration
Auto Re-lock Setting
Volume Setting
Language Setting mode
Lockout Mode
*Network Module Setting
*This function appears only
with RF network module
installed.
CAUTION: When joining a network your controller may or may not be aware of any
previously saved user codes stored in the lock. It is recommended that all user codes be
deleted from the lock prior to joining a network.
key.
key to continue."
User Number (UN)
ƒ 1~25: without network module
M
ƒ 1~250: with network module
Register
Delete
Enable
Disable
High
Low
Silent
English
Spanish
French
Enable
Disable
Register
Delete
.
key.
U
Continue
Complete
Continue
Complete
P/N AYRD220-INST-FUL Rev B
13