Gsd 41 Message Advisories (Optional) - Garmin G1000 Reference Manual

GIA 63W MESSAGE ADVISORIES (CONT.)
Message
COM1 RMT XFR – COM1 remote
transfer key is stuck.
COM2 RMT XFR – COM2 remote
transfer key is stuck.
NAV1 RMT XFR – NAV1 remote
transfer key is stuck.
NAV2 RMT XFR – NAV2 remote
transfer key is stuck.
FAILED PATH – A data path has failed. A data path connected to the GDU or the GIA

GSD 41 MESSAGE ADVISORIES (OPTIONAL)

Message
GSD1 CONFIG – GSD1 config error.
Config service req'd.
GSD1 COOLING – GSD1 temperature
too low.
GSD1 COOLING – GSD1 over
temperature.
GSD1 SERVICE – GSD1 needs service.
Return unit for repair.
MANIFEST – GSD1 software
mismatch. Communication halted.
190-00600-04 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
Annunciations & Alerts
Comments
The COM1 and/or COM2 transfer switch is
stuck in the enabled (or "pressed") position.
Press the transfer switch again to cycle its
operation. If the problem persists, the system
should be serviced.
The remote NAV1 and/or NAV2 transfer
switch is stuck in the enabled (or "pressed")
state. Press the transfer switch again to cycle
its operation. If the problem persists, the
system should be serviced.
63/W has failed.
Comments
GSD1 and the CDU have different copies of
the GSD1 configuration.
GSD1 is reporting a low temperature
condition.
GSD1 is reporting an over-temperature
condition.
GSD1 is reporting an internal error condition.
The GSD may still be usable.
GSD1 has incorrect software installed. The
system should be serviced.
85