Garmin G1000 Reference Manual page 64

Hazard Avoidance
System Self Test
1) With the Traffic Map Page displayed, set the range to 2/6 nm.
2) Select the STANDBY Softkey.
3) Select the TEST Softkey.
4) Self test takes approximately eight seconds to complete. When completed
successfully, traffic symbols are displayed and a voice alert "TAS System Test
OK" is heard. If the self test fails, the system reverts to Standby Mode and
a voice alert "TAS System Test Fail" is heard.
Displaying Traffic on the Navigation Map
1) Ensure TAS is operating.
2) With the Navigation Map displayed, select the MAP Softkey.
3) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
Traffic Collision Avoidance System (TCAS II) (Optional)
NOTE: If the system is configured to use TIS, the optional TCAS II is not
available for use.
System Test
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Select the TEST Softkey. The aural annunciation "TCAS Test" will be
heard. A test pattern of traffic symbols is displayed on the Traffic Page
and inset map on the PFD. The VSI will display a red no descent indication
and a green climb indication of 2000 feet per min. and red from 2000
to 4000+. The pitch display will also display the appropriate indications
appropriate with the VSI. The self test takes approximately eight seconds
to complete, after which a voice alert "TCAS Test Passed" is heard. In the
event the system test fails, a voice alert "TCAS Test Failed" is heard and a
visual annunciation 'TCAS FAIL' appears on the PFD. In addition, a visual
annunciation 'FAIL' appears in the Operating Mode box on the Traffic Map
Page.
48
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-04 Rev. A