Create A User Waypoint Using The Map Pointer - Garmin G1000 Reference Manual

c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'USER' waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
11) Press the ENT Key. The cursor is displayed in the 'RAD' (radial) field. Enter
the desired radial from the reference waypoint.
12) Press the ENT Key.
13) The cursor is now displayed in the 'DIS' (distance) field. Enter the desired
distance from the reference waypoint.
14) Press the ENT Key.
15) Press the FMS Knob to remove the flashing cursor.

CREATE A USER WAYPOINT USING THE MAP POINTER

1) Press the Joystick to activate the panning function and pan to the map
location of the desired user waypoint.
2) Press the ENT Key. The User Waypoint Information Page is displayed with
the captured position.
NOTE: If the pointer has highlighted a map database feature, one of three
things happens upon pressing the ENT Key: 1) information about the selected
feature is displayed instead of initiating a new waypoint, 2) a menu pops up
allowing a choice between 'Review Airspaces' or 'Create User Waypoint', or
3) a new waypoint is initiated with the default name being the selected map
item.
190-00600-04 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
Flight Planning
27