Table of Contents
Advertisement
Installation
Unpacking & Inspection
The Magic Messenger was carefully checked at the factory. Inspect
the carton and unit for signs of damage. If damage is found, notify the
retailer from whom the unit was purchased. If the unit was shipped to
you, you must file a claim for damage with the shipping company.
Installation Precautions
Refer to the mounting template included with the unit for instructions
on wall-mounted installation.
Observe the following installation precautions:
Do not install the unit in damp areas, or in areas where it is likely
to be exposed to rain or moisture.
Do not install the unit in areas where the average temperature is
likely to go below 32°F or exceed 90°F.
Use suitable fasteners on hollow walls or other similar thin
materials.
If the telephone line has "call-waiting," this service must be
terminated by your phone company in order for the Magic
Messenger to operate properly.
Connecting a Power Supply
Connect the output plug from the power supply included with the
Magic Messenger into the 24V AC/DC jack on the rear panel of the
Magic Messenger. Plug the power supply into any convenient 110V
AC outlet.
AT&T Digital Magic Messenger
9
Advertisement
Table of Contents
Need help?
Do you have a question about the Digital Magic Messenger System and is the answer not in the manual?
Questions and answers