Table of Contents
Advertisement
Figure 1
PLB-CF2 (front view)
PLB-CF2 Two-Slot Mini Cardframe
Product Information
Overview
The PLB-CF2 Mini Cardframe can accommodate either one or two PHAST control
cards. Any PHAST control card can be installed in the PLB-CF2.
If a PHAST PLC-MCU board is installed in a PLB-CF2, it can control a small
Landmark system without the need for a PHAST PLB-CF10 Cardframe or a PHAST
Hub Box.
More typically, the PLB-CF2 will be used in addition to an existing PLB-CF10
Cardframe to allow one or two PHAST control cards to be placed at any remote
location on a PhastLink network.
A maximum of 20 devices can be attached. The 12 VDC power supply for the PLB-
CF2 can also power up to two PLK-IMS or PLK-DMS keypads.
The PLB-CF2 is housed in an elegant black enclosure that is in harmony with the
design of other Landmark products. Its small size allows it to be placed in
convenient, unobtrusive locations.
Figure 1 and Figure 2 show the PLB-CF2.
Product Information
1
Advertisement
Table of Contents
