Table of Contents
Advertisement
Figure 5
RJ-45 Socket and Connector
6
Operation Instructions
TO AVOID SERIOUS INJURY OR DEATH, DO NOT OPEN UP THE
CARDFRAME.
PhastLink Cable Information
This section contains information that you will need to make PhastLink cables,
plus general information on connecting PhastLink devices.
PhastLink cables are used to connect all PhastLink-compatible devices, including
keypads, dimmers, amplifiers, audio switches, etc. PhastLink uses a standard
10Base-T connection (i.e. Category 5 wire and RJ-45 connectors). The wire should
be connected in the standard manner, as shown in the following figure. If a
consistent color code is used, wiring problems will be minimized.
Figure 5 shows the RJ-45 Socket and Connector, and Figure 6 gives pinout
information.
RJ-45 Socket
1
2
3
4
5
6
7
8
Warning! Dangerous Voltage!
RJ-45 Plug
1
2
3
4
5
6
7
8
PLB-CF2 Two-Slot Mini Cardframe
Advertisement
Table of Contents
