LG LS300N-D1 Instruction Manual page 10

OSD MENU -
Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
FUNCTION
CAMERA ID OFF
MIRROR OFF
DAY NIGHT AUTO
MOTION OFF
PRIVACY OFF
GAMMA 0.45
LANGUAGE ENGLISH
RESET
RETURN
OSD MENU -
※Operating Conditions
1) Due to the connection with the value of AGC, it doesn't work when "AGC OFF".
2) Delay time shall be more than 1sec.(at least).
(with the value "0", it is in "DAY MODE" continuously.)
3) Because a start level is connected with the value of AGC, A start level shall be set less
than the value of AGC.
4) A start level shall be higher than an end level.
20
FUNCTION > DAY & NIGHT
•
AUTO : The camera selects black and white mode.
- DELAY :
- START LEVEL :
- END LEVEL :
•
COLOR : Color mode enabled.
•
B / W : Black and White mode enabled.
- BURST ON :
- BURST OFF :
FUNCTION > DAY & NIGHT
If the picture is dark, on color mode if the picture is
bright enough.
Please select 'AUTO' and then press the SETUP
button to DAY&NIGHT setting.
Delay time when the DAY&NIGHT function starts or stops.
(0~63 sec)
Set the brightness level where the DAY&NIGHT start to
operate. 0(high light)~255(low light)
Set the brightness level where the DAY&NIGHT function
stop operating. 0(high light)~255(low light)
Please select 'B/W' and then press the SETUP
button to BURST the setting.
BURST signal 'ON'
BURST signal 'OFF'
19