Contents 1 Preliminary note ���������������������������������������������������������������������������������������������������3 1�1 Symbols used ������������������������������������������������������������������������������������������������3 1�2 Warning signs used ���������������������������������������������������������������������������������������3 2 Safety instructions �����������������������������������������������������������������������������������������������3 3 Functions and features ����������������������������������������������������������������������������������������5 3�1 Applications ���������������������������������������������������������������������������������������������������5 4 Installation������������������������������������������������������������������������������������������������������������5 4�1 Installation conditions ������������������������������������������������������������������������������������5 5 Operating and display elements ��������������������������������������������������������������������������5 6 Electrical connection ��������������������������������������������������������������������������������������������6 7 Settings ����������������������������������������������������������������������������������������������������������������6 7�1 The sensor is to switch when the object is detected��������������������������������������6 8 IO-Link �����������������������������������������������������������������������������������������������������������������7...
1 Preliminary note 1.1 Symbols used ► Instruction > Reaction, result […] Designation of pushbuttons, buttons or indications → Cross-reference Important note Non-compliance can result in malfunctions or interference� 1.2 Warning signs used WARNING Warning of serious personal injury� Death or serious irreversible injuries may result� 2 Safety instructions • Please read this document prior to set-up of the unit�...
Page 4
WARNING Visible laser light; laser protection class 2� Use of controls or adjustments other than those specified herein may result in hazardous radiation exposure� Damage to the retina is possible� ► Do not stare into the laser beam! ► Apply the enclosed labels (laser warning) in the immediate vicinity of the unit� ►...
3 Functions and features The unit is used as an optical distance sensor� 3.1 Applications • The optical distance sensor measures distances between 0�03 and 2 m� • It has a background suppression of up to 20 m� • The switching outputs are antivalent� The distance between the sensor and the background must be limited to max�...
6 Electrical connection The unit must be connected by a qualified electrician� ► The national and international regulations for the installation of electri- cal equipment must be adhered to� ► Voltage supply according to EN 50178� ► Disconnect power� ► Connect the unit as follows: DC PNP 4: OUT1 = normally open / IO-Link 2: OUT2 = normally closed...
8 IO-Link 8.1 General information This unit has an IO-Link communication interface which requires an IO-Link- capable module (IO-Link master) for operation� The IO-Link interface enables direct access to the sensor values and parameters and provides the possibility to set the parameters of the unit during operation� In addition communication is possible via a point-to-point connection with a USB adapter cable�...