At+Ftptype; At+Ftpputopt - SimCom SIM900B Application Note

SIM900 IP APPLICATION

2.3.3 AT+FTPTYPE

AT+FTPTYPE SET THE TYPE OF DATA TO BE TRANSFERRED
Test command Response
AT+FTPTYPE =?
OK
Parameters
Write command Response
AT+FTPTYPE
=<value> OK
If error is related to ME functionality:
ERROR
Parameters
<value> "A" : for FTP ASCII sessions
Read command Response
AT+FTPTYPE? +FTPTYPE: < value >
OK
Parameters
See Write Command
Reference
Note
When this value is set to A, all the data sent by the stack to the FTP server is made of 7
bits characters (NVT-ASCII: the MSB is set to 0). As a consequence binary data
containing 8 bits characters will be corrupted during the transfer if the FTPTYPE is set
to A.

2.3.4 AT+FTPPUTOPT

AT+FTPPUTOPT SET FTP PUT TYPE
Test command Response
AT+FTPPUTOPT
=? OK
Parameters
SIM900 IP APPLICATION
"I" : for FTP Binary sessions
Default value is "I"
17