Alcatel-Lucent 9363 Installation And Commissioning Manual page 55

Product conformance statements
....................................................................................................................................................................................................................................
This equipment complies with Part 24 - Personal Communications Services, Subpart E -
Broadband PCS.
This equipment complies with Part 27 – Miscellaneous Wireless Communications
Services.
This equipment complies with Part 90 – Private Land Mobile Radio Services.
Product safety conformance
The Alcatel-Lucent Metro Cell Access Point equipment is Safety Certified ITE by CSA
International.
This Certification is marked on the equipment main nameplate label. Should the local
Authority Having Jurisdiction (AHJ) require prior or additional verification of this
Certification, a Product Certificate of Compliance can be obtained from the specific
Certification Body by the Business/Product Unit Applicant for the product or by
contacting:
Technical Support Services, within the United States: +1 630 224 4762, prompt 2
Any modifications to this equipment are not permitted without review and official written
authorization from the specific Certification Body. Unauthorized changes may violate the
Product Safety Certification. Modifications or changes authorized by official CN/CNN
are assumed to have received prior approval from this Lab.
Indoor applications
This equipment is intended for installation in restricted access locations where access is
controlled or where access can only be gained by service personnel with a key or tool.
Access to this equipment is restricted to qualified service personnel only.
Antenna exposure
Antenna installations for the Alcatel-Lucent Metro Cell Access Point equipment shall be
performed in accordance with all applicable manufacturer's recommendations, and
national laws and regulations. To ensure correct antenna installation, the antenna installer
shall perform all necessary calculations and/or field measurements to evaluate compliance
with applicable national laws or regulations regarding exposure to electromagnetic fields.
The supplier of radio equipment, the supplier of antenna equipment and the integrator and
builder of the site must provide sufficient information so that the limits of the exclusion
zones can be determined. Any changes to the antenna or other equipment in the transmit
path may require re-evaluation of the exposures to electromagnetic fields.
Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all
installations must be evaluated for requirements contained in Table 1, "Limits for
maximum permissible exposure," in section 1.1310.
....................................................................................................................................................................................................................................
B-8 Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
United States
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011