Alcatel-Lucent 9363 Installation And Commissioning Manual page 51

Product conformance statements
....................................................................................................................................................................................................................................
The following information on Alcatel-Lucent supplied equipment is available from
customer representatives:
• Output power and antenna characteristic, if the product is equipped with an integral
antenna
• A detailed description of at least one typical normal configuration, including antenna
system (feeders, connectors, combiners, antennas, etc.), if the product is intended to
be used with external antennas
• Limit distances for general public and occupational exposure. If the product is
intended for use with external antennas, limit distances shall be given for the given
typical system configurations.
• Information on how to specify exposure levels and limit distances for any optional
system configuration not specified in detail
• Information on how to install the equipment/system or the external antennas in order
to ensure that the separation between the radiating antenna and general public are
exceeding the maximum allowed distances
Information on the methodology used for the determination of RF safety compliance
distances and exclusion zones, and the results of the compliance evaluation shall be
available for inspection by officials of the governing authorities.
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established. For more information
regarding collection and recovery of packaging and packaging waste within specific
jurisdictions, contact the Alcatel-Lucent Environment, Health and Safety organization.
Recycling / take-back / disposal of products and batteries
In compliance with Waste Electrical and Electronic Equipment Directive (WEEE
Directive) 2002/96/EC 01/2003, amended by WEEE Directive 2003/108/EC 12/2003,
electronic products and batteries bearing or referencing the symbols shown below shall be
collected and treated at the end of their useful life, in compliance with applicable
European Union and other local legislation. They shall not be disposed of as part of
unsorted municipal waste. Due to materials that may be contained in the product and
batteries, such as heavy metals, the environment and human health may be negatively
impacted as a result of inappropriate disposal.
Note 1: For electronic products put on the market in the European Union, a solid bar
under the crossed-out wheeled bin indicates that the product was put on the market after
13 August 2005.
....................................................................................................................................................................................................................................
B-4 Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
European Union
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011