Alcatel-Lucent 9363 Installation And Commissioning Manual page 35

Metro cell - indoor v2 2100mhz and 1900/850mhz

Table of Contents

Metro Cell installation and commissioning

....................................................................................................................................................................................................................................

Connect the ground cable

Note: The grounding of the device depends on customer, country and site

requirements, therefore these should be checked beforehand.

The Metro Cell Indoor must be grounded with a 16 mm² ground cable (Type

NYY-1x16mm² or similar) to a grounding system. The grounding cable and cable lug

are not included in delivery and must be locally supplied.

To attach the ground cable perform the following steps.

...................................................................................................................................................................................................

Route the ground cable from the ground system to the Metro Cell - Indoor.

...................................................................................................................................................................................................

At the Metro Cell - Indoor cut the cable to a proper length, strip the cable end and crimp a

ground lug, with a hole suitable for an M6 screw, on the end of the cable.

Clean the contact surface area and use antioxidant to avoid oxidation.

...................................................................................................................................................................................................

Connect the ground cable to the grounding point on the Metro Cell - Indoor.

Alcatel-Lucent 9363 MC

401-387-097

Issue 1 May 2011

Antenna

Connectors

(N female)

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Metro Cell - Indoor cabling

3-9

Table of Contents