Woods BRUSHBULL BB48X Operator's Manual page 42

INSTALL OPTIONAL CHECK CHAINS
Check chains are used to carry the front of cutter at a
set height.
1. Thread check chains (3) through check chain
bracket (2).
BB48X
1. Check chain complete
2. Check chain bracket, lower
3. 3/8 Chain, 32-link and check lug
4. 3/4 NC x 6 Cap screw GR5
5. 3/4 NC Hex lock nut
6. 5/8 NC x 2-1/4 Cap screw GR5
7. 5/8 Flat washer, standard
8. 5/8 NC Hex nut
9. Mast Plate, BB60X, BB72X, BB84X
10. Tractor top link bracket
11. Mast Plate, BB48X
42 Assembly
2. Attach lower end of check chain (3) to mast plate (9
3. Attach keyhole brackets (2) to each side of tractor
4. Insert check chains through keyhole brackets and
Figure 41. Check Chain Installation
or 11) with bolt (6), washer (7), and nut (8).
top link bracket (10) with bolt (4) and nut (5).
set cutter height.
BB60X,
BB72X,
BB84X
(Rev. 5/10/2009)
MAN0632 (5/15/2007)