Related Manuals for marsden B-100
Summary of Contents for marsden B-100
- Page 1 USER MANUAL B-100 Stainless Steel Bench Scale Please take time to read these instructions before starting to use the scale Version 1.0 04/18...
-
Page 2: Table Of Contents
Contents Introduction Product Specification Safety Instructions Explanation of Graphic Symbols Power Supply and Low Battery Operation: Basic Functions Operation: Advanced Functions Page 2... -
Page 3: Introduction
Introduction Thank you for purchasing a Marsden industrial scale. This is a precision CE Approved Weighing Instrument and considerate use will result in many years of accurate weighing. The scale has a maximum load capacity of 30kg which must not be exceeded. -
Page 4: Safety Instructions
Marsden/the manufacturer shall not be liable for damages arising from failure to heed the following instructions: ● When using electrical components under increased safety requirements, always comply with appropriate regulations. -
Page 5: Explanation Of Graphic Symbols
This product must be disposed of at a communal collection point. Carefully read this operation manual before setup and commissioning, even if you are already familiar with Marsden scales. Transport and storage temperature limit indicating the upper and lower limit (transport and storage temperature on packaging). -
Page 6: Power Supply And Low Battery
Power Supply & Low Battery The indicator uses power from the 6V4Ah rechargeable battery, or use the AC adaptor stored in the compartment underneath the scale. When the display shows -batLo- connect to mains supply and charge the scale immediately. After 40 seconds of inactivity the scale will switch to power saving mode. -
Page 7: Operation: Basic Functions
Operation: Basic Functions 1.1 SWITCHING ON THE SCALE 1) Press the ON button firmly. 2) The scale will test all of the display segments. 3) The scale will now go into weighing mode and should show 0.000 on the display. 1.2 SWITCHING OFF THE SCALE 1) Hold the OFF button for three seconds when the scale is turned on. - Page 8 2.2 COUNTING FUNCTION 1) To count items on the scale, first place a sample quantity on the scale. Switch the indicator to count mode by pressing SET and ON/ZERO key at the same time. 2) The display shows ’PCS’. Press ON/ZERO to confirm. 3) Press SET to change digit and Tare to change the value.
- Page 9 Tel: 01709 364296 / 0800 169 2775 Fax: 01709 364293 E-mail: sales@marsdengroup.co.uk Manufacturing and Distribution: Unit 7, Centurion Business Park, Coggin Mill Way, Rotherham, S60 1FB Head Office: Unit 1, Genesis Business Park, Sheffield Road, Rotherham S60 1DX www.marsden-weighing.co.uk...
Need help?
Do you have a question about the B-100 and is the answer not in the manual?
Questions and answers