Periodic Maintenance - Crown GLTS-30 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL, GAS SKILLETS, MODELS GLTS-30, GLTS-40

4.0 PERIODIC MAINTENANCE

WARNING: Disconnect the power supply to the appliance before
cleaning or servicing.
CAUTION: Do not use cleaning agents that are corrosive.
CAUTION: Operating, testing, and servicing should only be
performed by qualified personnel.
CLEANING
After each use, allow the tilting braising pan to cool and clean it. Keep exposed cleanable areas
of the tilting braising pan clean at all times. Do not get water in electrical box or any electrical
component.
1. Thoroughly wash pan, pouring spout (See
Figure 2), lid and exterior surfaces with
detergent and warm water. If necessary, soak
pan to remove food that is stuck to pan
surface. Rinse thoroughly and wipe dry with a
soft clean cloth.
2. Clean removable strainer and receiving pan
support (see Figure 2) with detergent and
warm water. Rinse thoroughly and wipe dry
with a soft clean cloth.
3. Clean around burner air mixers and orifices (at
rear of burner) if lint has accumulated.
4. Visually ensure tube lighter ports (Figure 3)
are unobstructed.
PART NUMBER 10100R4 12
FIGURE 3
2005-10-14