Using Your Dryer - Whirlpool 4KWED4900BQ0 Use And Care Manual

USING YOUR DRYER

1.
Clean the lint screen
Check the lint screen before each load. Pull the lint screen
straight up. Roll lint off the screen with your fingers. Do not
rinse or wash screen to remove lint. Push the lint screen firmly
back into place.
For additional cleaning information, see "Dryer Care."
2.
Load the dryer
Place laundry in the dryer. Close the door.
Do not tightly pack the dryer; clothes should be able to
tumble freely.
NOTE: Your model may have a different door than the one
shown. Some models have drop down doors.
3.
Select the desired cycle
Appearance may vary
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your load,
by turning the knob to dryness level.
Selecting Jeans*, Very Dry, ENERGY PREFERRED, or Less Dry
/Delicate automatically adjusts the dryness level at which the
dryer will shut off. Once a dry level is set, it cannot be changed
without stopping the cycle.
AUTOMATIC DRY cycles give the best drying in the shortest
time. Drying time varies based on fabric type, load size, and
dryness setting.
NOTE: Jeans* is used for heavy fabric loads and removes the
most moisture. Very Dry removes load moisture and is used for
medium fabric loads. ENERGY PREFERRED is used for a starting
point for AUTODRY cycles. Choose ENERGY PREFERRED for
optimal energy savings. Less Dry/Delicate removes less moisture
and used for loads you may want to put on a hanger to complete
drying.
* This option is only available on some models.
7