Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BKI Fry Warmer HFW
Summary of Contents for BKI Fry Warmer HFW
- Page 1 BKI Fry Warmer MODELS HFW, HFWB, HFWS Operation & Installation...
-
Page 2: Warranty Information
Warranty Information LIMITED ONE YEAR WARRANTY BKI (The "Company") warrants to the original purchaser that at time of shipment from the Company factory, this equipment will be free from defect in materials and workmanship. Written notice of a claim under this warranty must be received by the Company within ONE YEAR from the date of installation, but no longer than ONE YEAR AND THREE MONTHS from date of shipment from the factory. -
Page 3: Table Of Contents
BKI Fry Warmer Table of Contents ... 1 Introduction... 2 Safety Precautions ... 2 Safety Signs and Messages ... 2 Safe Work Practices ... 2 Safety Labels... 4 Installation... 5 Instructions For Shipping Damage... 5 Electrical Information And Grounding ... 5 Installation Instructions... -
Page 4: Introduction
BKI Fry Warmer Congratulations! You have chosen a Fry Warmer that will give you many years of fine service from the original manufacturer, BKI. The BKI name and trademark on this unit assures you of the finest in design and engineering — that it has been built with care and dedication —... - Page 5 BKI Fry Warmer Keep this manual with the Equipment This manual is an important part of your equipment. Always keep it near for easy access. If you need to replace this manual, contact: Technical Services Department P.O. Box 80400 Simpsonville, S.C. 29680-0400 Or call toll free: 1-800-927-6887 Outside the U.S., call 864-963-3471 Protect Children...
-
Page 6: Safety Labels
BKI Fry Warmer Introduction Safety Labels... -
Page 7: Installation
BKI Fry Warmer Serious injury, equipment damage or death could result if attempting to install this unit yourself. Ensure that an authorized BKI service agent install the oven. Instructions For Shipping Damage You are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for damage when they arrive. -
Page 8: Operation
BKI Fry Warmer Unit Startup and Preheating 1. Turn on power to the unit. 2. Allow the equipment to preheat for ten (10) minutes before loading it with product. Operational Guidelines Foods should be a minimum of 195 F. before being placed in the warmer. ... -
Page 9: Maintenance
BKI Fry Warmer Failure to comply with the maintenance below could result in a serious accident. Electrocution, equipment failure or property damage could result if an unlicensed electrician performs electrical repair. Ensure that a licensed electrician perform electrical repair. Scheduled Maintenance Cleaning This unit should be cleaned at the end of each working day. - Page 10 BKI Fry Warmer Maintenance 4. Remove Package Staging Rack by tilting forward(a) then lifting vertically(b). 5. Remove the Pan Divider by lifting it out of the pan vertically. 6. Remove the Pan by picking up on the front then lifting entire pan vertically.
- Page 11 BKI Fry Warmer 7. Use a nylon brush(a) to thoroughly clean grease and debris from holes in pan. Be sure to clean top and bottom of pan, pan divider, staging rack, and flat surface insert with hot soapy water. Rinse well and dry(b).
- Page 12 BKI Fry Warmer 10. After brushing grid, use a clean cloth to wipe the debris and oil from grid and machine. Do not spray any cleaning chemicals or any other liquid into blower grid. This could cause a risk of shock or prevent the machine from working properly. 11.
-
Page 13: Troubleshooting
BKI Fry Warmer Troubleshooting Refer to the table below for troubleshooting information. Problem Package Holding Area is not holding heat Noisy fan Package Holding Area is not heating and perforated pan is not heating Pilot light on Hood Illuminated Package Holding Area is heating and the perforated pan is not heating Cause... -
Page 14: Repair
BKI Fry Warmer Repair Before replacing any parts, make sure the power has been turned off and the unit has cooled down. Lamp Replacement Only use Teflon-coated lamp to prevent glass contamination. 1. Make sure power to the unit is OFF and the unit has cooled down. 2. -
Page 15: Notes
BKI Fry Warmer Notes Notes... - Page 16 P.O. Box 80400, Simpsonville, S.C. 29680-0400, USA http://www.bkideas.com Made and printed in the U.S.A LI9999/082007...