Maintenance; Scheduled Maintenance; Cleaning - BKI Fry Warmer HFW Operating & Installation

Bki fry warmer operation & installation
Table of Contents

Advertisement

BKI Fry Warmer

Scheduled Maintenance

Cleaning

This unit should be cleaned at the end of each working day. Use the following procedure:
1. Turn the unit off and allow it to cool down to room temperature.
2. Remove any food from unit.
3. Remove Flat Surface Insert by lifting vertically.

Maintenance

Failure to comply with the maintenance below could result in a serious accident.
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs electrical repair. Ensure that a licensed electrician perform electrical
repair.
Failure to remove power from this unit may cause severe electrical shock. This unit may
have more than one disconnect switch.
Never use abrasive cleaners that may damage the finish.
Never steam clean the interior.
Avoid getting excess water in the interior of the unit.
Do not clean the heater/blower assembly by applying compressed air.
Do not leave this unit on and unattended after business hours.
7
Maintenance

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fry warmer hfwbFry warmer hfwsHfwHfwbHfws

Table of Contents

Save Article as PDF