Technical Support - Foscam FI9803P Quick Installation Manual

2. Once you have successfully installed the Foscam App,
launch the App and login to the Foscam Cloud. If you do not
have an account, please select "Sign up"to create your account.
3. Now that you have logged in to your Foscam Could account
you can add your camera. Press the "Add camera" button and
follow on screen prompts to scan the QR Code, this is located on
the bottom of your camera.
After scanning the camera QR code, the QR Code UID should
now be auto populated. Follow the steps below to connect your
camera to your wireless network.
. 264
a. The Camera default username
is admin and there is no
password .
b. Enter a new secure password.
c. Enter the Password of your
wireless router.
d. Click "CONNECT".
Fail: Please confirm the
Success: The camera has
password of wireless router or
been added successfully.
camera, and then re-add.
4. After your camera is added successfully, you can access it any
where and any time via App or Foscam Cloud Service.
3
FAQ
★
Forget Username / Password
Restore your camera back to factory settings:
1. Press "Reset" button for about 10 seconds with camera
energized.
2. Release the button and wait about 30 seconds. The camera
will automatically restart and be restore to factory settings with
its username / password set to admin / (blank ). (you will need
to re-connect your Wi-Fi).
Please Note:
After restoring the camera to factory default settings, the
default connection is EZLink mode.
In case your device failed to add via EZLink mode, you can
use wired connection. Please refer to the User Manual on
the CD .
4

Technical Support

We hope your experience with the Foscam IP camera is enjoyable
and easy to use. If you experience any issues or have any
questions that this Quick Installation Guide has not answered,
please contact our support department via the websites listed
below 24 hours a day, 7 days a week.
Foscam Digital Technologies
www.foscam.us www.foscam.ca www.foscam.co.uk
www.foscamgroup.com www.foscam.com