Removing The Power Button With Fingerprint Reader; Prerequisites; Procedure - Dell G3 15 Service Manual

Removing the power button with fingerprint
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.

Prerequisites

1 Remove the base cover.
2 Remove the battery.
3 Remove the solid-state drive/Intel
4 Remove the fan.
5 Remove the heat sink.
6 Remove the wireless card.
7 Remove the power-button
8 Remove the system board.
9 Remove the display assembly.

Procedure

1 Peel the fingerprint reader cable off the palm rest and keyboard assembly.
2 Remove the screw (M2x2) that secures the power button to the palm rest and keyboard assembly.
3 Using a plastic scribe, release the fingerprint-reader board from the palm rest and keyboard assembly.
4 Lift the power button, along with its cable, off the palm rest and keyboard assembly.
66

Removing the power button with fingerprint reader

computer. After working inside your computer, follow the instructions in
Optane.
board.
37
reader
After working inside
www.dell.com/