Charging - Videocon V1306 User Manual

Warning:

1.1.2 Charging

While charging, the power supply indicator at phone's screen icon zone will flash in a rotation
manner, if the phone is off while charging, a charging animation will still appear, indicating that
the phone is charging. If the phone is still being overused while the power supply is insufficient,
the charging animation will appear on the screen after the charging has started for a while.
When the power supply indicator at the screen's icon zone shows full and stops flashing, it means
charging has completed. If it takes place when the phone is off, the screen will display charging-
finished icon. The process generally takes about 2.5 hours. It is normal that the battery, the
phone and the charger will become hot during the charging process.
After the charging of the battery is complete, disconnect the phone and the charger from the AC
power supply.
Note:
Make sure to power off the phone before taking out SIM card, otherwise your
SIM card might be damaged.
1. Battery must be charged in a well ventilated place with surrounding
temperature at -10 ~+55 , and it is imperative that a charger provided
by manufacturer is used. Using unauthorized charger might cause
danger, which also violates warranty terms prescribed by the
manufacturer. If the charging temperature is too high or too low, the
phone will automatically give warning and stop charging, so as to
prevent damages to battery.
2. Using the phone while charging may extend the charging time.
3. If battery gets fully discharged, the phone will automatically get switched
off.
8