Putting The Battery Over; Power On The Handset; Charging The Battery - Videocon V1705 User Manual

INSTALLING THE BATTERY
Slide the battery into the compartment in
such an way that the metal connectors
of the battery are aligned with the metal
connectors of the phone
Push the battery
compartment and ensure that the battery
is securely placed in the compartment.
PUTTING THE BATTERY COVER
Place the battery back cover over the
phone squarely with bottom side dent
fi tted to the groove the phone.

POWER ON THE HANDSET

Press the power key/End key and keep it
pressed for about 3-5 seconds to
Switch on the phone.

CHARGING THE BATTERY

1. Connect the charger to a power
socket.
2. Connect the charger to the charger
jack on the phone.
3. Wait until the battery is completely
charged. During
the charging icon is displayed in
animation. When the charging icon
becomes static, the battery is fully
charged.
4. Disconnect the charger from the
phone.
5. Disconnect the charger from the
power socket.
10
down into the
the charging,