Table of Contents
Advertisement
1
Getting Started
1.1 Battery
The battery at its initial condition is charged to 50% full, and can be used after unwrapping. For
the first three times of charging, do not recharge until the battery is totally exhausted, so that the
battery can reach its best usage performance.
1.1.1 Removing and installing battery
1. When removing the battery, follow the steps:
i.
Press the battery back cover to unlock and slide it downwards to open the back cover.
ii.
Locate the battery groove at the bottom middle and lift the battery up as indicated by the
arrow.
iii.
Remove the battery out from the phone.
2. When installing the battery, follow the steps:
i.
Slide the battery into the compartment in such a way that the metal connectors of the
battery are aligned with the metal connectors of the phone.
ii.
Push the battery down into the compartment.
iii.
Place the back cover of the battery onto the phone squarely, and push in upward
direction to engage the locks.
7
Advertisement
Table of Contents
