Table of Contents
Advertisement
2.2 Emergency Calls
As long as in the network service range (which can be confirmed by checking the signal strength
bars on the top left corner of the screen), you can always call emergency service. If your network
supplier does not provide roaming service in your area, the screen will display "Emergency", to
inform you that only emergency call is permitted. If you are within the network service range, you
can also make emergency calls even without the SIM card.
2.3 Answering a Call
To answer any incoming call, press dialing key or "answer" key. If an earphone has been
connected, use the button on the earphone to answer a call, and if it is not convenient for you to
press it, set automatic answer as on, assuring that the earphone is plugged on, so as to make
calls automatically answered while the phone rings or vibrates. If Any Key answer function is
chosen, pressing any key, other than Ring off key and right soft key, can answer an incoming call.
2.4 Call Records
Your phone can also store call records of the latest missed calls, received calls, dialled calls, the
time of last call as well as total amount of received calls and total dialled calls for you.
2.5 Call Options
In connected state, press left soft key "Options" to enter call option, or press right soft key "H-
free" to activate speaker. Under activated-hands free condition, press right soft key "H-hold" to
power off speaker. Operation methods of call options are the same as that of Function menu.
This call options can only be viewed during call process, moreover, the functions of call waiting,
call holding, and conference calls need service support. Please contact your service provider for
more details. In call options, you can perform the following operations:
Hold Single call: Put the current call on hold.
End Single call: End the current call.
New Call: Enter new dialing interface.
Phonebook: Enter phone book menu.
Messages: Enter short message menu. Owing to restrictions of network engagement,
MMS function is barred during call process.
Sound recorder: Record the current call.
Background Sound: Setup the background sound for the current calling.
Change Voice: Setup voice changer for current calling.
Mute: Enables you to make your voice response mute.
DTMF: Operations of DTMF powering on and off.
Conference*: Enter multiple party conference call state. By following the prompts, you
can have the following functions: receive waiting calls, add them into multiple party call,
maintain the multiple party call, talk privately with one party of the conference while
maintaining all other callers, connect one party in the call conference with another party
while exiting the multiple party call oneself, maintain one party of the multiple party call
and end current call and all other maintained calls.
13
Advertisement
Table of Contents
