Section 2: Getting Started; Inside The Box; Installing And Removing The Battery - Videocon v1602 User Manual

Section 2: Getting Started

Inside the Box

The standard packing contents are as follows:
Base Trans-receiver
Battery
Charger
Hands free Kit
User Manual
Service Guide

Installing and Removing the Battery

To install the battery:
1. Locate the groove at the top of the phone, and
pull the battery cover out to open.
2. Push the battery in the battery compartment in
such a way that the connectors of the phone
are aligned with the connectors on the battery.
To remove the battery:
1. Turn off the phone and unplug other external
power sources.
2. Locate the groove at the top of the phone, and
pull the battery cover out to open.
3. Pull
compartment as shown in the image.
4
out the battery from the battery