Related Manuals for Detex ECL-620
Summary of Contents for Detex ECL-620
- Page 1 WARNING: WHEN PRINTING TEMPLATES FROM THE WEB SITE, CHANGE PRINTER SETTINGS TO "PRINT TO FULL SIZE" (100%). DO NOT SCALE TO FIT...
-
Page 2: Tools And Supplies
P/N: INS-620 /PM August 11, 2010 Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045 (830)629-2900 / 1-800-729-3839 / Fax (830)620-6711 E-MAIL: detex@detex.com INTERNET: www.detex.com INSTALLATION INSTRUCTIONS FOR THE ECL-620 OUTSIDE LEVER TRIM FOR ECL-600 TOOLS AND SUPPLIES Pencil Adhesive Tape... - Page 3 Drill & Tap Schedule A Wood Frame Metal Frame Frame Holes A. (2 ea) #14 Screws #14 Screws or 1/4-20 Machine screws 3/16 Drill #9 Drill #7 Drill; 1/4-20 Tap B. (4 ea) #10 Screws #10 Screws 10-24 Machine screws 1/8 Drill #25 Drill #25 Drill;...
- Page 4 Preparing the ECL-620 for installation 1. Assemble the rim cylinder (not included) through the escutcheon and the cylinder retaining bracket as shown in Fig 1. Add cylinder spacer or cut the tailpiece as shown. IF SPACER IS USED DOOR THICKNESS + 3/8”...
- Page 5 6. Remove Inside Template TPL-620 from face of door and discard. PREPARING ECL-600 BACKPLATE FOR THE ECL-620 - Fig 7 7. Install the input lever cam onto the backplate with the push nut, using disposable tube as shown. Discard the tube after use.
-
Page 6: Installation
14. Install backplate onto the door. Secure with two (2) screws at holes marked "5" and "7". 15. Align cam with hole marked "8" and tape to secure. 16. Insert ECL-620 LEVER TRIM into hole on door. Align key cylinder tailpiece through door. Align input extension with lever input cam. - Page 7 Fig. 10 20. Remove OKC retaining spring and align marks. Fig. 10 Fig. 11 21. Engage alignment bolt on mechanical assembly with alignment hole on relatching assembly as shown in Detail 1. 22. Install mechanical assembly with screws in holes marked "1, 10, 11 and 3". 23.
- Page 8 ...
- Page 9 ...
Need help?
Do you have a question about the ECL-620 and is the answer not in the manual?
Questions and answers