Inverter Features; Ac Panel - Xantrex XPower 3000 Owner's Manual

Inverter Features

This section describes the different parts of the inverter.

AC Panel

Item Description
1 AC compartment with cover (1a) houses the AC terminal
block for hardwiring the inverter
2 GFCI-protected dual AC outlet
3 AC knockout
Take the cover out when passing cables (wires) through for
hard wiring the inverter.
4 Reset button is used to reset the 20 A supplementary (over-
current) protectors.
5 Power light (green) indicates the inverter is operating.
6 Remote ON/S
TANDBY
remote ON/S
TANDBY
7 Fault light (red) indicates that the inverter has shut down due
to inverter overload or over-temperature.
8 ON/S Switch
TANDBY
Turns the inverter's control circuit on and on Standby mode.
This switch is not a power disconnect switch. Disconnect AC
and DC power before working on any circuits connected to the
inverter.
9 Remote ON/S
TANDBY
cable.
975-0555-01-01
connector port for connecting the
switch.
Switch comes with 20 feet (6m) long
1 2
3
1a
Figure 2 AC Panel
Non-sinusoidal
output only.
Non seulement de
sortie sinusoïdale.
REMOTE
POWER FAULT
PUISSANCE FAUTE
4 5 6 7 8
9
3