LoadLifter 5000 Series
Installing the LoadLifter 5000 Series System
COMPRESSED AIR CAN CAUSE INJURY AND DAMAGE TO THE VEHICLE AND PARTS
DANGER
IF IT IS NOT HANDLED PROPERLY. FOR YOUR SAFETY, DO NOT TRY TO INFLATE THE
AIR SPRINGS UNTIL THEY HAVE BEEN PROPERLY SECURED TO THE VEHICLE.
GETTING STARTED
1. Support the axle with jack stands, remove the wheels and raise or lower to obtain
2. There must be 8" clearance between the frame and the rear tire for this kit
MN-1046
normal ride height (figs. 2 & 3).
to fit (fig. 3).
8"
fig. 2
fig. 3
5