connecting to AV devices
You can view the recorded video and photo images(VP-DX205(i)/DX2050/DX210(i) only) on a large screen by connecting
the DVD camcorder to a TV.
CONNECTING TO A TV
•
This function is available in DISC Play/CARD Video Play/CARD Photo Play mode.
page 26
•
To play back your recordings, the television must be PAL compatible. page 121
•
We recommend that you use the AC power adaptor as the power source for the DVD
camcorder.
Use the provided AV cable to connect the DVD camcorder to a TV as
follows:
1. Connect the end of the AV cable with the single plug to the AV jack of the
DVD camcorder.
2. Connect the other end with video (yellow) and left(white)/ right(red) audio
cables to the TV.
•
For more information about the connection, refer to your TV's user manual.
•
Before connecting, make sure that the volume on TV is turned down: forgetting this may cause feedback from the TV
speakers.
•
Carefully connect the input and output cables to the corresponding connections on the device the DVD camcorder is being
used with.
•
Make sure to set "AV In/Out" to "Out" before connecting to an external device. (VP-DX200i/DX205i/DX210i only)
Viewing on TV screen
1. Turn on the TV and set the input selector to the Input connection the DVD camcorder is connected to.
-
This is often referred to as "line." Refer to the TV instruction manual for how to switch the TV input.
2. Turn the DVD camcorder on.
-
Slide the POWER switch downwards, then open the LCD screen.
-
Set the appropriate storage media. (VP-DX205(i)/DX2050/DX210(i) only) page 38
-
Press the MODE button to select the Play (
-
Press the MENU button and use the Joystick to set the desired "Play Mode" on the menu. page 45
-
The image from the camcorder will appear on the TV screen.
3. Perform playback.
-
You can perform playback, recording or make settings in the menu while viewing on your TV screen.
102_ English
) mode. page 26
DVD camcorder
TV
Signal fl ow
AV cable