Maintenance - Adam Eclipse Electric Fire Use And Care Manual

OPERATING THE ELECTRIC FIRE
The appliance is controlled using 4 switches, located under the hood of the fire.
A switch is in the ON position when the side with the markings on (i.e. I, or II)
is 'pressed in'
Use the following sequence to operate. The
Controls located under the hood

MAINTENANCE

Please allow the unit to cool down completely before cleaning.
There are no specific requirements for the care of this unit, other than general
cleaning.
Metallic (silver/chromed effect) fires can be cleaned using a cloth and propriety
cleaner. Other features (non-metallic) can be cleaned using a clean moistened
cloth and finally wiped with a dry cloth.
If the supply cord is damaged it must be replaced by a suitably qualified person.
The area around the fire should be kept free from animal hair, lint and other
extraneous material that may be drawn into workings of the appliance and could
affect its performance.
CO9073
Use and Care Manual
Eclipse Electric Fire
Customer telephone helpline: 08448 809301
Helpline email address: helpline@adamsurrounds.co.uk
represents a 'pressed switch.'
grey
On/Off with Effect
only
1kW Heat setting
- 8 -
Cool Air Blow &
Effect
2kW Heat Setting
V3_210711