Table of Contents
Advertisement
Menu
Function
UTIL
MEM FORMAT
(UTILITIES)
SCAN MODE
ALARM STATUS Toggles alarm mode on, off, or audible.
ALARM LO
LIMIT
ALARM HI LIMIT Sets the HI (High) limit parameter. If the measurement
XFER
BACKUP
(TRANSFER)
SETUPS
RESTORE
SETUPS
BACKUP GRID
RESTORE GRID Allows you to restore grid files saved on a computer to your
ABOUT
37
Description
Sets format of new data logger files (GRID / ENGINE)
Enables a high speed scan mode that increases the sample
rate to 32 measurements per second.
Sets the LO (Low) limit parameter. If the measurement falls
below this value, a red light will illuminate and the alarm will
sound.
exceeds this value, a red light will illuminate and the alarm
will sound.
Allows you to backup the setups currently stored in your
gauge to a computer via the RS232 port.
Allows you to restore setups saved on a computer to your
gauge via the RS232 port.
Allows you to backup grid files stored in your gauge to a
computer via the RS232 port.
gauge via the RS232 port.
Provides Elcometer NDT contact information and your
gauge software version.
Refer to the help section of your gauge NDT Link software
for a complete electronic manual covering data transfer.
Advertisement
Table of Contents
