Table of Contents
Advertisement
Menu
Function
CAL
UNITS
(CALIBRATION)
VELOCITY
ONE POINT
TWO POINT
MATERIAL
DISP
VIEW
(DISPLAY)
BACKLIGHT
CONTRAST
BSCAN START
BSCAN DEPTH
SETUP
OPEN
SAVE
DEFAULT
SETUP
LANGUAGE
DATA
NEW
EDIT
OPEN
DELETE ONE
FILE
DELETE ALL
FILES
Description
Toggle between Metric (millimetres) or English (inches)
units.
This function calibrates your gauge to a specific material
type by entering a material velocity.
Performs a single point calibration. This function allows you
to automatically calculate the velocity by entering a known
sample thickness.
Performs a two-point calibration. This function allows you to
automatically calculate the velocity by entering a second
known sample thickness.
Select the material velocity from a chart of basic material
types when a known sample thickness, or material velocity
cannot be obtained.
Choose between DIGITS (large digits) and B-SCAN (cross
section) views.
Choose between OFF, ON, AUTO, or INVERT backlight.
Adjust the display contrast for variable light conditions.
(B-SCAN view mode only) Set the start position of the
B-SCAN view.
(B-SCAN view mode only) Set the overall depth of the
viewable measurement area. It functions a lot like a zoom
on a camera.
Displays a list of factory and user-defined setups currently
stored in memory. These setups can be recalled and used
at any time.
Save a custom setup that you have modified or created.
Loads a basic default setup. Use only as a last resort if the
setups in your gauge have been corrupted and a computer
is not accessible.
Select the menu language
Creates a new alpha numeric grid file with auto identifiers.
You can customise the file according to your requirements.
Modify the parameters of grid files previously saved.
Note: Predefined coordinates cannot be changed once they
have been created.
Recalls existing grid files from gauge memory.
Deletes a single file from the gauge memory.
Deletes all files from the gauge memory.
36
Advertisement
Table of Contents
