Table of Contents
Advertisement
The following procedures outline the necessary steps for saving and editing a setup:
1. Press
, scroll to the SETUP menu and then highlight the SAVE
function.
2. Press
to display the Save Setup edit box.
3. Scroll to NAME and then press
•
Use the
,
characters,
through the characters.
•
When you have finished, press
4. If you want to add a note, repeat step 3 for NOTE.
5. When you have finished, scroll to SAVE SETUP? and press
The setup list screen is displayed.
6. Scroll through the list of setups until the required location to save the
setup is highlighted.
7. Press
to activate the confirmation screen.
8. Press
to save the Setup, or
9. Press
to return to the measurement screen.
Note: The Name and Note parameters of a Setup can be edited at any time
by repeating the Save Setup routine described above. Therefore, the Save
Setup function can also be considered an Edit Function.
25
to edit its value:
,
, and
arrows to scroll through the
to select characters, and
to enter the value.
to cancel.
to backspace
.
Advertisement
Table of Contents
