aUdio dUbbing (vp-d382( i )/d382h/d385( i ) only)
•
This feature enables you to dub your voice through the internal microphone or other
audio equipment onto a pre-recorded camcorder tape.
The original sound on the tape will not be erased.
•
The Audio Dubbing function works only in Player mode. ➥page 18
•
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
•
You can add sound to the original sound on a pre-recorded tape recorded in SP mode
with 12bit sound.
1. Set the Select switch to TAPE. (VP-D385( i ) only).
2. Press the MODE button to set Player (
3. Move the Joystick (/) left or right and find the time frame of the scene to be
dubbed.
4. Press the Joystick to playback, and press it again to pause the scene.
•
If you want to resume to playback, just press the Joystick again on playback.
5. Press the A.DUB button on the remote control.
•
Audio dubbing (
•
The camcorder is ready for dubbing.
6. Press the (PLAY) button (on the remote control) or Joystick to start dubbing.
•
Press the ■ (STOP) button (on the remote control) or move down the Joystick ( ▼ )
to stop the dubbing.
•
You can not use the Audio Dubbing function while playing a write protected video tape.
•
To utilize an external sound source, use the Audio/Video cable to connect external sound source input.
To dub from an external sound source, set "AV In/Out" function to "In". (VP-D381i/D382i/D385i only) ➥ page 68
).
) indicator is displayed.
STOP
0:00:00
SP
10Sec
60min
16:9 Wide
16BIt
S
No Tape !
1/50
M
29
W
T
C.Nite 1/30
12:00 1.JAN.2008
<VP-D382( i )/D382H/D385( i ) only>
English _65