Samsung VP-D381( i ) User Manual page 81

Setting the File nUmber (File no.)
•
File number setting works only in M.Cam mode.
•
File numbers are given to images in the order they were recorded when they are
stored on the memory card.
•
File numbers may be set as follows:
- "Series": When there are existing files, the new image will be named as the
next number in the sequence.
- "reset": When there are no files stored on the memory card, the file numbering
starts from 0001.
1. Set the Select switch to CArD.
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (
Joystick.
5. Move the Joystick (
Joystick.
6. Move the Joystick (
or "reset", then press the Joystick.
7. To exit, press the MENU button.
When you set "File No." to "Series", each file is assigned with a different number so as to avoid duplicating
file names. It is convenient when you want to manage your files on a PC.
/ up or down to select "Memory", then press the
▲ ▼)
/ up or down to select "File No.", then press the
▲ ▼)
/ up or down to select the desired option "Series"
▲ ▼)
page 18
➥
).
MODE
CARD TAPE
BATT.
M.Cam Mode
Memory
File No. Photo Quality Super Fine Series
� �
Move Select MENU Exit
M.Cam Mode
Memory
File No. Series
✔
Reset
Move Select Exit
MENU
English _77