Selecting A Hearing Profile For Sound Enhancement - Sennheiser RS 5000 Manual

RS_5000_570727_0117_PRT.book Seite 18 Montag, 10. Oktober 2016 2:52 14
EN Using the RS 5000
Selecting a hearing profile for sound
enhancement
The hearing profiles alter the sound of the audio signal in
order to especially improve the speech intelligibility. The pro-
files are used to specifically change certain frequency ranges
by e.g. boosting or attenuating low-frequency or high-fre-
quency tones.
All three hearing profiles feature a compression function
which compensates for volume differences by boosting the
volume of quiet passages and reducing the volume of loud
passages if necessary.
The balance setting is saved on the stethoset receiver. If
you are using several receivers with a transmitter, the
respective receivers are optimally adjusted to match the
personal hearing preferences of the users (e.g. you and
your partner). Please note that the personal hearing
preferences can only be adjusted when only stethoset
receiver is connected to the transmitter.
Displaying the activated hearing profile
The activated hearing profile is not permanently displayed.
To check the activate hearing profile:
Switch the stethoset receiver on by putting it on.
Briefly press the Hearing profile button on the transmitter.
The currently activated hearing profile is displayed for
10 seconds.
Pro
Hearing profile LED
file
–
No segment lit
18 | RS 5000
2s
Meaning
The sound from the con-
nected audio source is
reproduced unchanged.
Com
pres
sion
no