Charging The Rechargeable Battery - Sennheiser RS 5000 Manual

RS_5000_570727_0117_PRT.book Seite 11 Montag, 10. Oktober 2016 2:52 14

Charging the rechargeable battery

A complete charging cycle takes
the receiver for the first time, charge its rechargeable battery
for a complete charging cycle without interruption.
When the rechargeable battery is almost empty, the
status
LED lights up red and you hear 2 beeps. The
LED on the transmitter lights up white. The stethoset
receiver switches off after a few minutes.
Place the stethoset receiver into the transmitter's charging
compartment so that the volume buttons face upwards.
The stethoset receiver is magnetically oriented to the cor-
rect position. The stethoset receiver automatically
switches off and the
lights up white. The LED segments display the charge
status of the rechargeable battery. When the rechargeable
battery is fully charged, all LED segments light up white.
Battery
LED
–
st
1 segment flashes
st
1 segment lit,
nd
2 segment flashes
st nd
1 + 2 segments lit,
rd
3 segment flashes
All segments lit
Putting the RS 5000 into operation EN
about 3 hours. Before using
Battery
LED on the transmitter
Meaning
Transmitter is not charging.
Rechargeable battery is being
charged. Less than 1/3 of the
charge capacity is reached.
Rechargeable battery is being
charged. Up to 1/3 of the charge
capacity is reached.
Rechargeable battery is being
charged. Up to 2/3 of the charge
capacity is reached.
Rechargeable battery is fully charged.
Receiver
Battery
3 h
100
%
RS 5000 | 11