EFI Fiery proServer SE Quick Start Manual page 9

10 To nest several jobs: Import the jobs. Hold down <Ctrl>, and click the jobs in the job list.
Then, in the toolbar, click Create Nesting.
You can apply uniform page scaling, select a page orientation, and define the amount of space
between nested pages, etc. On the Layout tab, open the Nesting pane. When you have made
your settings, click Apply to update the preview.
You can define how the nesting is aligned on the sheet. On the Layout tab, open the Layout
Options pane. Select an alignment by clicking the appropriate cell in the diagram.
11 To tile a job: Import the job. On the Layout tab, open the Tiling pane. On the pane bar, select
the check box to activate the settings.
You can define a tile size, an overlapping margin, and overlapping marks, etc.
You can omit tiles from the job — for example, to exclude the door area of a wall tiling. You
can also process and print selected tiles only (which excludes all other tiles from the job). In
the preview window, right-click one or more tiles and click the appropriate item: Do Not
Print or Print Tile Immediately.
You can display a WYSIWYG preview of one or all tiles by clicking Tiling Preview. Displayed
tiles are overlaid with the tile number. The tile numbers of the surrounding tiles are also
displayed. You can save the preview as a PDF file and use it as a guide to help you to piece the
tiles together after printing.
12 To review or modify spot colors: On the Color tab, open the Spot Colors pane.
You can change spot color definitions. In the table, in the "Map to" column, select a different
spot color. In the toolbar, click Save. The preview is updated accordingly.
For each spot color you can review the combination of CMYK inks that is sent to the printer.
In the table, in the "Source" column, select "InkJet" to display the spot color in CMYK
values. You can modify these values. In the toolbar, click Save. The preview is updated
accordingly.
13 To cut jobs with additional devices: set up i-Cut cutter, Zünd Cut Center, or a supported print-
and-cut device.
In System Manager, in the layout area, click the workflow. On the Finishing tab, open the Cut
pane. On the pane bar, select the check box to activate the cutter settings, and then configure
your cutter device with a selected cutter manufacturer and device. For more information, see
the Fiery XF online help, or visit https://Inkjet.support.efi.com.
14 In the toolbar, click Save.
You can now process and print the job.
15 In the toolbar, click Print.
9